Wika Pascal 100 Manuale Utente Pagina 9
- Pagina / 93
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
2 Safety
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 9
GB
2.4 Special hazards
WARNING!
■ When measuring pressure, make sure that the process pressure line is shut off
and depressurised before it is connected to or disconnected from the pressure
module.
■Disconnect test leads before changing to another measurement or generation
function.
■ Observe the working conditions in accordance with chapter "3. Specifications".
■ Always operate the device within its overload limits.
■ To ensure problem-free operation, only operate the Multichannel Calibrator
model Pascal 100 or Pascal 100/IS on battery power. Only use the mains
connection for charging the Hand-held pressure calibrators batteries.
■ Do not apply a voltage greater than the specified voltage to the instrument.
See chapter "3. Specifications".
■ Make sure that the test probes never contact a voltage source while the test
leads are connected to the current terminals.
■ Do not use the calibrator if it is damaged. Before using the multichannel
calibrator, check that there are no cracks or missing plastic parts on the case.
Pay particular attention to the insulation of the connectors.
■ Select the proper function and correct measuring range for the measurement.
■ Inspect the test leads for damaged insulation or exposed metal. Check the
continuity of the test leads. Damaged test leads should be replaced before using
the multichannel calibrator.
■ When using test probes keep fingers away from the test probe contacts. Keep
your fingers behind the test probes' finger guards.
■ First connect the common lead, and then the live lead. When disconnecting,
remove the live test lead first.
■ Do not use the multichannel calibrator if it is not working properly. The
instrument protection might be compromised. If in doubt, have the instrument
checked.
■ Do not operate the calibrator in areas with explosive gases, vapours or dust.
■ To avoid false readings, which could lead to possible electric shock or personal
injury, charge the rechargeable battery as soon as the battery indicator appears.
■ In order to avoid any possible damage to the multichannel calibrator or the test
equipment, use the correct leads, the correct function and the correct range for
the measuring application.
- Operating instructions 1
- 1 General Information 5
- 2 Safety 6
- below 7
- ■ Battery operation: 8
- ■ Ex Hazardous Areas 8
- 3 Specifications 11
- 4 Design and Function 14
- 6 Commissioning, operation 17
- Transmitter 20
- HART slave 21
- Direct transducer 23
- Figure 24 – Range setup 36
- Figure 53 – mA range setup 49
- Figure 73 – Realtime graph 66
- Figure 74 – Ramp profile 67
- Figure 75 – RAMP Menu 67
- Figure 77 - Ramp running 68
- Figure 79 – DISK Menu 69
- Figure 80 – Main screen 69
- – Offset Off 72
- Figure 89 – Report menu 74
- Figure 90 – Report setup 75
- Figure 100 – Menu Logger 79
- Figure 102 – Logger running 80
Prodotti e manuali riguardandi Strumenti di misura Wika Pascal 100
Strumenti di misura Wika CAL Manuale Utente
(136 pagine)
(136 pagine)
Strumenti di misura Wika A2G-20 Manuale Utente
(52 pagine)
(52 pagine)
Strumenti di misura Wika A2G-25 Manuale Utente
(56 pagine)
(56 pagine)
Strumenti di misura Wika A2G-40 Manuale Utente
(44 pagine)
(44 pagine)
Strumenti di misura Wika A2G-80 Manuale Utente
(44 pagine)
(44 pagine)
Strumenti di misura Wika A2G-45 Manuale Utente
(64 pagine)
(64 pagine)
Strumenti di misura Wika A2G-85 Manuale Utente
(56 pagine)
(56 pagine)
Strumenti di misura Wika BCS10 Manuale Utente
(108 pagine)
(108 pagine)
Strumenti di misura Wika GTU-10 Manuale Utente
(40 pagine)
(40 pagine)
Lbl-lighting 2-Circuit MO Surf Mag Xfmr 500w 120v/12v manuals
Owner’s manuals and user’s guides for Lighting Lbl-lighting 2-Circuit MO Surf Mag Xfmr 500w 120v/12v.
We providing 1 pdf manuals Lbl-lighting 2-Circuit MO Surf Mag Xfmr 500w 120v/12v for download free by document types: User Manual
Commenti su questo manuale